Other information:
B1404:11, B1404:12, B1404:13, B1404:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver side airbag circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver side airbag
If a fault is d..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Disconnect the electrical connector and remove the grommet.
Remove the nuts.
Torque:
35 lb.in (4 Nm)
..