Ford Ecosport: Body and Paint / Body Repairs - General Information
Removal
WARNING:
The following procedure prescribes critical repair steps
required for correct restraint system operation during a crash...
General Specifications
Item
Specification
Plastic front fascia paint maximum thickness
12 mils (300 microns)
Plastic rear fascia paint maximum thickness
12 mils (300 microns)
General Specifications
Item..
Other information:
B007E:11, B007E:12, B007E:13, B007E:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver seatbelt retractor pretensioner circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver seatbelt retract..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Using a diagnostic scan tool, begin the PMI process for the GWM fo..