Ford Ecosport: Body and Paint / Interior Trim and Ornamentation

Removal and Installation - Spare Wheel Mounting Bracket

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the bolts and the spare wheel and tire...

Removal and Installation - A-Pillar Trim Panel

Removal NOTE: RH shown, LH similar. Position the front door weatherstrip aside. Disconnect the tether clip from the A-pillar trim panel...

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Valve Cover

Special Tool(s) / General Equipment 205-153 (T80T-4000-W) Handle 303-1247VCT Spark Plug Tube Seal Remover and InstallerTKIT-2006UF-FLMTKIT-2006UF-ROW Plastic Scraper Materials Name Specification Motorcraft® Silicone Gasket and SealantTA-30 WSE-M4G323-A4  Removal NOTICE: During engine repair procedures, cleanli..

Ford Ecosport 2014-2026 Service and Repair Manual: General Procedures - Intake Manifold Vacuum Test

Bring the engine to normal operating temperature. Connect the Vacuum/Pressure Tester to the intake manifold. Run the engine at the specified idle speed. The vacuum gauge should read between 51-74 kPa (15-22 in-Hg) depending upon the engine condition and the altitude at which the test is conducted. Subtract 4.0193 kPa (1 in-Hg) from the specified reading for every..