Ford Ecosport: Glass, Frames and Mechanisms / Removal and Installation - Front Door Glass Run and Bracket

Ford Ecosport 2014-2026 Service and Repair Manual / Body and Paint / Glass, Frames and Mechanisms / Removal and Installation - Front Door Glass Run and Bracket

Removal

NOTE: LH side shown, RH side similar.

NOTE: Removal steps in this procedure may contain installation details.

Remove the front door trim panel.
Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

Remove the front door watershield.

Remove the front door glass run and bracket bolts.
Torque: 27 lb.in (3 Nm)

Remove the front door glass run and bracket.

Installation

To install, reverse the removal procedure.

If the door is equipped with one touch up/down.
Carry out the power door window initialization.
Refer to: Power Door Window Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Removal and Installation - Driver Door Window Control Switch

Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: LHD shown, RHD similar. NOTE: Removal steps in this procedure may contain installation details...

Removal and Installation - Front Door Glass Top Run

Removal NOTE: LH side shown, RH side similar. Remove the front door window glass. Refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation)...

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Front Side Member and Fender Apron Panel LH

Special Tool(s) / General Equipment Resistance Spotwelding Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM - Removal NOTE: Factory welds may be substituted with resistance or metal inert..

Ford Ecosport 2014-2026 Service and Repair Manual: General Procedures - Seatbelt Tongue Rotated On Belt

Adjustment NOTE: Typical seatbelt tongue shown, others similar. Fold the seatbelt as indicated. Feed the folded portion of the seatbelt into the seatbelt tongue. Pull the seatbelt through the seatbelt tongue to remove the twist in the seatbelt. ..

Removal and Installation - Oil Pressure Switch

Materials

Name Specification Motorcraft® Thread Sealant with PTFE
TA-24-B WSK-M2G350-A2

Removal

NOTE: Removal steps in this procedure may contain installation details.

With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
If equipped, remove the bolts and the underbody shield.