Ford Ecosport: Body Closures / Removal and Installation - Luggage Compartment Lid Hinge
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the liftgate.
Refer to: Liftgate (501-03 Body Closures, Removal and Installation).
-
-
Remove the liftgate upper hinge screw.
Torque:
89 lb.in (10 Nm)
-
Remove the liftgate upper hinge nuts.
Torque:
17 lb.ft (23 Nm)
-
Remove the bolts and liftgate hinge.
Torque:
26 lb.ft (35 Nm)
Installation
-
To install, reverse the removal procedure.
-
Check the alignment and correct if necessary.
Refer to: Liftgate Alignment (501-03 Body Closures, General Procedures).
Removal
Open the liftgate.
Remove the liftgate strut.
Installation
To install, reverse the removal procedure...
Special Tool(s) /
General Equipment
Door Lift
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
Item
Description
1
Steering wheel
2
Steering column height and length lever adjustment
3
PSCM
4
EPAS motor
5
Steering column shaft
6
Tie-rod
7
Steering gear
8
Universal joint
Comments:Part of steering column shaft assembly
9
Steering co..
B0082:11, B0082:12, B0082:13, B0082:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger seatbelt load limiter circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passenger seatbelt load limite..