Ford Ecosport Owners and Service Manuals

Ford Ecosport: Body and Paint / Body Closures

Removal and Installation - Hood

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: This step is only necessary when installing a new component...

General Procedures - Front Door Alignment

Inspection NOTE: LH side shown, RH side similar. Check the body-to-front door dimensions. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation)...

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Heated Oxygen Sensor (HO2S)


Special Tool(s) / General Equipment 303-476 (T94P-9472-A) Socket, Exhaust Gas Oxygen SensorTKIT-1994-LM/MTKIT-1994-FTKIT-1994-FLM/FM Materials Name Specification Motorcraft® High Temperature Nickel Anti-Seize LubricantXL-2 -  Motorcraft® Penetrating and Lock LubricantXL-1 -  Removal With the vehicle in NEU..

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Liftgate Moulding


Removal NOTE: Removal steps in this procedure may contain installation details. Remove the liftgate trim panel. Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Disconnect the electrical connector and remove the grommet. Remove the nuts. Torque: 35 lb.in (4 Nm) ..

Categories

Removal and Installation - Oil Pressure Switch

Materials

Name Specification Motorcraft® Thread Sealant with PTFE
TA-24-B WSK-M2G350-A2
 

Removal

NOTE: Removal steps in this procedure may contain installation details.

With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
If equipped, remove the bolts and the underbody shield.

read more

Copyright © 2026 www.foecosport2.com