Ford Ecosport Owners and Service Manuals

Ford Ecosport: Body and Paint / Seatbelt Systems

Disassembly and Assembly - Rear Bumper Cover

DISASSEMBLY All vehicles Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation). Disconnect the rear bumper cover harness electrical connectors...

Description and Operation - Seatbelt Systems - Overview

Overview - Seatbelt System - 1st Row   WARNING: All seatbelt components must be inspected and corrected as part of any collision repair...

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Description and Operation - Blind Spot Information System - Overview


Overview BLIS ® The BLIS ® aids the driver in assessing whether another vehicle is present within a specific area (blind spot) to either side of the vehicle, extending rearward approximately 4 m (13 ft) beyond the rear bumper while driving on roads and highways...

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Side Obstacle Detection Control Module (SODCM)


Removal Side obstacle detection control module NOTE: This step is only necessary if a SODL or SODR is being replaced. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module...

Categories

Removal and Installation - Oil Pressure Switch

Materials

Name Specification Motorcraft® Thread Sealant with PTFE
TA-24-B WSK-M2G350-A2
 

Removal

NOTE: Removal steps in this procedure may contain installation details.

With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
If equipped, remove the bolts and the underbody shield.

read more

Copyright © 2026 www.foecosport2.com