Ford Ecosport: Body and Paint / Roof Sheet Metal Repairs
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name
Specification
Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM
-
Removal
NOTE:
Factory welds may be substituted with resistance or MIG
plug welds...
Other information:
BXXXX:2B, BXXXX:81 (any BXXXX DTC with a 2B failure type, or any impact sensor with an 81 failure type) Signal Cross Coupled
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM
monitors all deployable device and sensor circuits for a signal cross
coupled (short) between components...
Initialization
NOTE:
Until the initialization procedure is complete, the one-touch open and one-touch close function is disabled.
NOTE:
An initialization procedure that was interrupted or not
completed can be started again after cycling the ignition from ON to OFF
and back to ON again...