Ford Ecosport Owners and Service Manuals

Ford Ecosport: Body and Paint / Supplemental Restraint System

Removal and Installation - Seatbelt Shoulder Height Adjuster

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH shown, RH similar. Remove the upper B-pillar trim panel...

Description and Operation - Airbag and Seatbelt Pretensioner Supplemental Restraint System (SRS) - Vehicles With: Rear Seat Side Airbag - Component Location

Item Description 1 LH and RH front impact severity sensors 2 BECMB 3 Passenger front door side impact sensor 4 OCSM (includes OCS sensor and gel-filled bladder) 5 PAD indicator 6 RCM 7 Front passenger seatbelt buckle (includes buckle sensor) 8 Driver and passenger..

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Diagnosis and Testing - Pinpoint Test - DTC: Y


U2300:55, U2300:64 Refer to Wiring Diagrams Cell 46 for schematic and connector information. NOTE: DTC U2300:55 is set in every new RCM installed until configuration data is successfully received from the BCM . Do not install any new components for this DTC unless directed to do so in the pinpoint test. Normal Operation and Fault Conditions On the first igni..

Ford Ecosport 2014-2026 Service and Repair Manual: Diagnosis and Testing - Pinpoint Test - DTC: AF, Vehicles With: Rear Seat Side Airbag


BXXXX:4A (any BXXXX DTC with a 4A failure type) Incorrect Component Installed Normal Operation and Fault Conditions The RCM monitors all SRS device connections. If the RCM detects a device connected but is not configured for that component, the RCM sets a DTC and sends a message to the IPC to illuminate airbag warning indicator.   DTC Fault Trigger Conditions ..

Categories

Removal and Installation - Variable Camshaft Timing (VCT) Unit

Removal

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.

Remove the timing chain.
Refer to: Timing Chain (303-01C Engine - 2.0L Duratec-HE (129kW/175PS), Removal and Installation).
Remove the bolts and VCT units.
Discard the bolts.

read more

Copyright © 2026 www.foecosport2.com