Other information:
Removal
Remove the high-pressure fuel pump.
Refer to: High-Pressure Fuel Pump (303-04C Fuel Charging and Controls -
2.0L Duratec-HE (129kW/175PS), Removal and Installation).
During the removal or installation of components,
cap, tape or otherwise appropriately protect all openings and
tubes/fittings to prevent the ingress of dirt or other con..
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Valve guides tend to wear in an hourglass pattern.
The ball gauge can be inserted into the combustion chamber side of the
valve guide, if necessary.
Use a ball gauge to determine the inside diameter of
the valve guides in 2 directions at the top, middle and bottom of the
val..