Ford Ecosport: Rear Suspension - FWD / Description and Operation - Rear Suspension - Component Location
| Item |
Description |
| 1 |
Shock absorber |
| 2 |
Spring |
| 3 |
Twist-beam rear axle |
| 4 |
Rear axle bushing |
Overview
The rear suspension consists of the following components:
Twist-beam axle (torsionally rigid axle)
Coil springs
Shock absorbers
Rear axle bushings
Wheel bearing and wheel hub assemblies
Wheel studs
Characteristics of rear axle:
Single-pipe
gas shock absorbers with stable damping performance for optimum
handling...
Other information:
Deactivation
NOTE:
During vehicle build, some modules, such as the IPC and BCM are set in factory mode.
Factory mode reduces the drain on the battery during longer periods
where the vehicle is not used. While in the factory mode, various
systems may be altered or disabled and the IPC
displays FACTORY MODE CONTACT DEALER in the message center...
Special Tool(s) /
General Equipment
303-1521Alignment Tool, Crankshaft Position SensorTKIT-2010C-FLM
303-1686Holding Tool, Camshaft
303-1689Holding Tool, Crank Damper
303-507Timing Peg, Crankshaft TDCTKIT-2001N-FLMTKIT-2001N-ROW
Trolley Jack
Wooden Block
Removal
NOTICE:
Do not loosen or remove the crankshaft pulley bo..