Ford Ecosport: Suspension / Front Suspension

General Procedures - Ride Height Measurement

Special Tool(s) / General Equipment Surface Gauge Check Ride Height Measurement - Front NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure...

Description and Operation - Front Suspension - Component Location

Item Description 1 Front stabilizer bar link 2 Stabilizer bar 3 Suspension strut and spring assembly 4 Subframe 5 Lower arm 6 Subframe attachment points ..

Other information:

Ford Ecosport 2014-2025 Service and Repair Manual: Removal and Installation - Front Floor Panel Lower Reinforcement

Special Tool(s) / General Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTE: Left hand (LH) side shown, right hand (RH) side similar. NOTE: Factory welds may be substituted with ..

Ford Ecosport 2014-2025 Service and Repair Manual: General Procedures - Cylinder Bore Taper

Check NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. If the cylinder bore taper does not meet specification, bore the cylinder to the next ..