Ford Ecosport: Rear Suspension - AWD / Description and Operation - Rear Suspension - Component Location
| Item |
Description |
| 1 |
Spring |
| 2 |
Shock absorber |
| 3 |
Stabilizer bar link |
| 4 |
Stabilizer bar |
| 5 |
Differential carrier rear bush |
| 6 |
Rear lower arm |
| 7 |
Wheel hub |
| 8 |
Rear wheel knuckle |
| 9 |
Upper arm |
| 10 |
Trailing arm bush |
Overview
The rear suspension consists of the following components:
Coil springs
Upper and lower arms
Shock absorbers
Stabilizer bar and links
Wheel bearing and wheel hub assemblies
Wheel knuckles
Wheel studs
Differential carrier and trailing arm bushes
The
rear suspension uses 2 parallel arms (1 upper and 1 lower)...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If servicing the RH (right-hand) tie rod, both bellows boots must be removed.
Remove the steering gear boot.
Refer to: Steering Gear Boot (211-02 Power Steering, Removal and Installation)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the steering column shrouds.
Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation).
Disconnect the ignition switch electrical connector...