Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
Remove the hood.
Refer to: Hood (501-02 Front End Body Panels, Removal and Installation).
Remove the bolts and the hood hinge.
Torque:
133 lb.in (15 Nm)
Installation
..
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in KOEO .
Make sure the vehicle battery is fully charged or is
connected to a battery charger. The battery state of charge should be
12.6 - 13.6 volts during vehicle programming.
NOTE:
A good internet connection is ..