Ford Ecosport: Engine / Fuel Charging and Controls - 2.0L Duratec-HE (129kW/175PS)

Removal and Installation - Thermostat Housing

Special Tool(s) / General Equipment Hose Clamp Remover/Installer Removal NOTE: Removal steps in this procedure may contain installation details...

Description and Operation - Fuel Charging and Controls - Component Location

2.0L Duratec-HE Item Description 1 Throttle body 2 Fuel injector 3 High-pressure fuel pump drive unit 4 High-pressure fuel pump 5 Fuel rail Fuel Pump Driver Module Item Description 1 Fuel pump driver module ..

Other information:

Ford Ecosport 2014-2025 Service and Repair Manual: Removal and Installation - Battery Tray

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the battery. Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation). 1.0L EcoBoost (92kW/125PS) (B7) NOTICE: The turbocharger compressor vanes can be damaged by even the smallest particles. When removing an..

Ford Ecosport 2014-2025 Service and Repair Manual: General Procedures - Cylinder Block Distortion

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Use a Straightedge that is calibrated by the manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of length, such as Snap-On® GA438A or equivalent. For example, if the Straightedge is 61 cm (24 in) long,..