Ford Ecosport Owners and Service Manuals

Ford Ecosport: Instrumentation and Warning Systems / Horn

Removal and Installation - Instrument Panel Cluster (IPC)

Removal NOTE: LH shown, RH similar. NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new IPC , it is necessary to upload the module configuration information to the scan tool prior to removing the IPC ...

Description and Operation - Horn - Component Location

Item Description 1 RH Horn 2 LH Horn ..

Other information:

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Cylinder Head


Special Tool(s) / General Equipment 303-F072Support Bar, Engine Oil Drain Equipment Trolley Jack Hose Clamp Remover/Installer Wooden Block Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESA-M1C200-AESE-M1C171-A  Removal NOTICE: Do not loosen or rem..

Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Rear Lamp Mounting Panel


Special Tool(s) / General Equipment 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTE: Factory welds may be substituted with resistance or metal inert gas (MIG) plug welds. Resistance welds may ..

Categories

Removal and Installation - Wheel Knuckle Bushing

Special Tool(s) / General Equipment

Hydraulic Press

Removal

NOTE: Removal steps in this procedure may contain installation details.

Remove the wheel knuckle.
Refer to: Wheel Knuckle - Vehicles With: Rear Drum Brakes (204-02B Rear Suspension - AWD, Removal and Installation).
Remove the rear toe adjustment retainers and remove the wheel knuckle mounting bracket.
Torque:
  Stage 1:  177 lb.in (20 Nm)
  Stage 2:  76 lb.ft (103 Nm)

read more

Copyright © 2026 www.foecosport2.com