Ford Ecosport: Engine / Evaporative Emissions - 2.0L Duratec-HE (129kW/175PS)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect and position aside the vent tube...
Overview
The EVAP
system prevents hydrocarbon emissions from entering the atmosphere by
storing fuel vapors and routing the vapors to the engine to be consumed
during normal engine operation...
Other information:
Special Tool(s) /
General Equipment
303-1521Alignment Tool, Crankshaft Position SensorTKIT-2010C-FLM
303-1686Holding Tool, Camshaft
303-1689Holding Tool, Crank Damper
303-507Timing Peg, Crankshaft TDCTKIT-2001N-FLMTKIT-2001N-ROW
Trolley Jack
Wooden Block
Removal
NOTICE:
Do not loosen or remove the crankshaft pulley bo..
Inspection and Verification
Verify the customer concern.
Visually inspect for obvious signs of mechanical or electrical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and refer to the Symptom Chart...