Ford Ecosport: Battery and Charging System / Battery, Mounting and Cables
Inspection and Verification
Verify the customer concern by operating the charging system.
Before diagnosing or repairing the charging system inspect the following items:
Check the battery for loose, damaged or corroded connections...
Battery Specifications
Vehicles with AUTO-START-STOP
Item
Specification
Voltage
12 Volts
Cold Cranking Amps (CCA) measured at -18 C (-0...
Other information:
Special Tool(s) /
General Equipment
303-1565Alignment Tool, CamshaftTKIT-2010C-FLM
303-507Timing Peg, Crankshaft TDCTKIT-2001N-FLMTKIT-2001N-ROW
Feeler Gauge
Materials
Name
Specification
Flange SealantCU7Z-19B508-A
WSS-M2G348-A11
Removal
NOTICE:
During engine repair procedures, cleanliness is extremely
important..
B0070:11, B0070:12, B0070:13, B0070:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver seatbelt anchor pretensioner circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver seatbelt anchor pre..