Ford Ecosport: Engine / Engine Ignition - 2.0L Duratec-HE (129kW/175PS)
Removal
NOTICE:
Make sure that the clutch pedal remains in the rest position.
NOTE:
Removal steps in this procedure may contain installation details...
Firing order
Item
Value
Firing order
1 - 3 - 4 - 2
Spark Plug
Item
Value
Spark plug
12405
Spark plug gap
0...
Other information:
Removal
NOTICE:
Washer fluid may escape.
Release the clips and remove the high mounted stop lamp.
Disconnect the electrical connector.
Installation
To install, reverse the removal procedure...
Pressure release
Remove the fuse F65 (fuel pump relay) from the junction box panel.
Start the engine and allow it to idle until the engine stops.
Crank the engine for approximately five seconds to make sure that the fuel rail pressure is released...