Ford Ecosport: Engine System - General Information / General Procedures - Valve Stem Diameter
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
-
Measure the diameter of each intake and exhaust valve
stem at the points shown. Verify the diameter is within specification.
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Valve guides tend to wear in an hourglass pattern...
Other information:
Special Tool(s) /
General Equipment
204-598-01Remover/Installer, Subframe Bushing Guide
205-271Installer, Pivot Bushing
Transmission Jack
Removal
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
Remove the rear halfs..
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the intrusion sensor.
Disconnect the electrical connectors.
Use the General Equipment: Interior Trim Remover
Installation
To install, reverse ..