Ford Ecosport: Lighting / Interior Lighting
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the diagnostic scan tool
prior to removing the module...
Overview
The interior lighting system consists of:
Courtesy lamps
Demand lamps
Ambient lighting
The courtesy lamps subsystem consists of:
Interior lamps
Door ajar switches (integrated into the door latches)
Courtesy lamp switch (integrated into the front interior lamp)
BCM
The
courtesy lamps provide illumination t..
Other information:
Special Tool(s) /
General Equipment
Brake/Clutch System Pressure Bleeder/Filler
Fluid Container
Bleeding
All vehicles
NOTICE:
If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
NOTE:
The HCU bleeding procedure and a second brake system pressure bleed must be carried out if a new HCU has been install..
Insulation
Insulation
is used as a sound-deadener to reduce exterior road and powertrain
noises from the interior of the vehicle. Mastic insulators are also used
as insulation. Insulation is installed:
under the roof.
above and below the instrument panel.
at the cowl side panels.
over the front and rear floorpans.
inside the B-, C- and D-pillar se..