Ford Ecosport: Engine Cooling - 2.0L Duratec-HE (129kW/175PS) / Description and Operation - Engine Cooling - Component Location
| Item |
Description |
| 1 |
Coolant outlet connector |
| 2 |
Cooling fan motor and shroud |
| 3 |
Radiator |
| 4 |
Coolant pump pulley |
| 5 |
Degas bottle |
| Item |
Description |
| 1 |
Coolant pump |
| 2 |
Thermostat housing |
Original Fluids
Name
Fill Capacity
Material: Motorcraft® Orange Concentrated Antifreeze/Coolant
/ VC-3-B
(WSS-M97B44-D)
6...
System Operation
Engine coolant flows primarily from the engine to the radiator circuit
and back to the coolant pump. Coolant is sent from the coolant pump
through the engine block and cylinder head...
Other information:
Special Tool(s) /
General Equipment
Brake/Clutch System Pressure Bleeder/Filler
Fluid Container
Bleeding
All vehicles
NOTICE:
If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water...
Removal
NOTICE:
Make sure that the clutch pedal remains in the rest position.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Left hand drive (LHD) shown, right hand drive (RHD) similar.
Disconnect the electrical connector and remove the start inhibit switch...