Ford Ecosport: Instrumentation and Warning Systems / Parking Aid - Vehicles With: Parking Aid Camera

Removal and Installation - Rear Parking Aid Sensor

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation)...

Description and Operation - Parking Aid - Component Location

Component Location - Parking Aid Camera Item Description 1 Rear parking aid camera 2 BCM 3 FDIM ..

Other information:

Ford Ecosport 2014-2025 Service and Repair Manual: General Procedures - Evaporative Emission System Leak Test

Activation Phase 1 - Leak Verification Run the EVAP Test with the scan tool. NOTE: Some small leaks may not be detected using the EVAP Test. If the system has passed the test but a leak is still suspected, then proceed to Phase 2. If the EVAP system failed the EVAP Test, then proceed to Phase 2. Phase 2 - System Leak Check Disc..

Ford Ecosport 2014-2025 Service and Repair Manual: General Procedures - Intake Manifold Vacuum Test

Bring the engine to normal operating temperature. Connect the Vacuum/Pressure Tester to the intake manifold. Run the engine at the specified idle speed. The vacuum gauge should read between 51-74 kPa (15-22 in-Hg) depending upon the engine condition and the altitude at which the test is conducted. Subtract 4.0193 kPa (1 in-Hg) from the specified reading for every..