Ford Ecosport: Side and Rear Vision / Description and Operation - Blind Spot Information System - Component Location
Component Location - BLIS ® / CTA
| Item |
Description |
| 1 |
DDM (if equipped) |
| 2 |
RH exterior mirror |
| 3 |
PDM (if equipped) |
| 4 |
SODR
|
| 5 |
SODL
|
| 6 |
LH exterior mirror |
Overview
BLIS ®
The BLIS
® aids the driver in assessing whether another vehicle is present
within a specific area (blind spot) to either side of the vehicle,
extending rearward approximately 4 m (13 ft) beyond the rear bumper
while driving on roads and highways...
Other information:
Configuration
Using the diagnostic scan tool, under the toolbox icon
select powertrain then select active on demand coupling barcode Entry.
Follow the instructions displayed on the diagnostic scan tool.
NOTICE:
If the active active on demand coupling bar code
information is not correct, rear drive unit (RDU) damage or driveability
concerns can occur...
B1404:11, B1404:12, B1404:13, B1404:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver side airbag circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver side airbag
If a fault is d..