Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Removal and Installation - Turbine Shaft Speed (TSS) Sensor
Removal
-
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
-
Disconnect the TSS sensor electrical connector.
-
Remove the TSS sensor bolt and the TSS sensor.
Torque:
89 lb.in (10 Nm)
Installation
-
To install, reverse the removal procedure.
Special Tool(s) /
General Equipment
Punch
Locking Pliers
Removal
Remove the main control cover.
Refer to: Main Control Cover (307-01B Automatic Transmission - 6-Speed
Automatic Transmission – 6F35, Removal and Installation)...
Special Tool(s) /
General Equipment
307-636Alignment Pins- Valve BodyTKIT-2008ET-FLMTKIT-2008ET-ROW
Flat Headed Screw Driver
Magnetic Socket
Long Nose Pliers
Main Control Valve Body and Solenoid Body
Remove the solenoid body-to-valve body bolts and separate the solenoid body from the valve body...
Other information:
Materials
Name
Specification
Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC
WSS-M2C938-AMERCON® LV,
Removal
With the vehicle in N , position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation)...
Sound Deadeners and Insulators
NOTICE:
Mastic is made of a combustible material and should be
removed prior to carrying out welding procedures to the area. Heat zones
from welding near mastic may cause the mastic material to burn.
NOTICE:
Corrosion protection must be restored to the area after the
mastic material is applied...