Ford Ecosport: Brake System / Power Brake Actuation
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Removal
NOTE:
Removal steps in this procedure may contain installation details...
REFER to: Brake System (206-00 Brake System - General Information, Diagnosis and Testing).
..
Other information:
Removal
NOTICE:
If installing a new A/C compressor due to an internal failure of the
old unit, carry out the following procedures to remove contamination
from the A/C system. Failure to remove contamination from the A/C
system, if present, will result in poor A/C performance and/or damage to
the new A/C compressor and other components.
If A/C flushing equipment is available, c..
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in KOEO .
Make sure the vehicle battery is fully charged or is
connected to a battery charger. The battery state of charge should be
12.6 - 13.6 volts during vehicle programming.
NOTE:
A good internet connection is ..