Ford Ecosport: Perimeter Anti-Theft Alarm / Description and Operation - Perimeter Anti-Theft Alarm - Component Location
| Item |
Description |
| 1 |
Hood latch (with integrated hood ajar switch) |
| 2 |
Intrusion sensor |
| 3 |
BCM
|
Overview
The perimeter anti-theft alarm system has three operation modes:
ARMED - The perimeter anti-theft alarm is armed when the
ignition is OFF and all vehicle entry points have been electrically
locked for 20 seconds...
Other information:
B0082:11, B0082:12, B0082:13, B0082:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger seatbelt load limiter circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passenger seatbelt load limite..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the passenger glove compartment.
Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).
Remove the glove compartment tray.
Disconnect the electrical connector.
..