Ford Ecosport: Frame and Mounting / Uni-Body, Subframe and Mounting System
Overview
The front subframe is bolted to the body and is used to:
aid in structural support.
provide mounting surfaces for the steering gear...
Other information:
B1413:11, B1413:12, B1413:13, B1413:96
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM monitors the front impact severity sensor circuits for the following faults:
Open circuit
Short to voltage
Short to ground
Faulted front impact severity sensor
If a fault is detec..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the battery.
Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation).
1.0L EcoBoost (92kW/125PS) (B7)
NOTICE:
The turbocharger compressor vanes can be damaged
by even the smallest particles. When removing an..