Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Removal and Installation - Solenoid Body
Removal
-
To remove the solenoid body.
Refer to: Main Control Valve Body (307-01B)
.
Installation
-
To install, reverse the removal procedure.
Special Tool(s) /
General Equipment
Long Nose Pliers
Removal
Using the scan tool Transmission Solenoid Identification
Number (IDN) function, retrieve the solenoid base part number and
stamping number...
Special Tool(s) /
General Equipment
307-003
(T57L-500-B)
Holding Fixture, Transmission
307-091Handle, Torque ConverterTKIT-2009TC-F
307-566Retainer, Torque ConverterTKIT-2006C-FFMFLMTKIT-2006C-LMTKIT-2006C-ROW
307-625Fixture, Bench MountingTKIT-2008ET-FLMTKIT-2008ET-ROW
307-627Installer, Converter SealTKIT-2008ET-FLMTKIT-2008ET-ROW
..
Other information:
U2300:55, U2300:64
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
NOTE:
DTC U2300:55 is set in every new RCM installed until configuration data
is successfully received from the BCM . Do not install any new
components for this DTC unless directed to do so in the pinpoint test.
Normal Operation and Fault Conditions
On the first igni..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH shown, RH similar.
Position the rear seat cushion to the full forward position.
Position the carpet aside to access the seatbelt anchor.
Remove the bolt and position the seatbel..