Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / General Procedures - Transmission Strategy Download

Programming

1. This procedure should be performed when a new transmission or main control valve body is installed in the vehicle.
   
   1. 13 - digit solenoid body strategy
      
   2. 7 - digit solenoid body identification
      
   • If a new main control was installed, record the 13-digit solenoid body strategy from the replacement solenoid body tag provided with the main control service kit. Place the replacement tag over the existing identification tag.
     
   • If a new transmission was installed, record the 13-digit solenoid body strategy from the solenoid body service information tag on the side of the transmission.
     

1. Using the scan tool, Select Toolbox and download the PCM – Transmission Strategy Download tool.
   

1. Run the PCM – Transmission Strategy Download tool. Follow the instructions displayed on the scan tool. There are fields to enter the solenoid body 7-digit identification and 13-digit strategy recorded from the solenoid body
   

1. Enter the solenoid body 13-digit strategy. The scan tool verifies the numbers entered are valid and displays a message if the information is not valid.
   

1. Follow the instructions displayed on the scan tool to program the transmission strategy file into the PCM .
   

1. NOTICE: If a drive cycle is not completed, erratic shifts and driveability concerns may occur.

   Road test the vehicle following the Adaptive Learning Drive Cycle.
   Refer to: Adaptive Learning Drive Cycle (307-01A Automatic Transmission - 6-Speed Automatic Transmission – 6F15, General Procedures).