Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Description and Operation - Final Drive
Ford Ecosport 2014-2026 Service and Repair Manual / Automatic Transmission / Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Description and Operation - Final Drive
Final Drive Component Exploded View
| Item | Description |
| 1 | Drive chain drive sprocket |
| 2 | Drive chain |
| 3 | Drive chain driven sprocket |
| 4 | Final drive planetary sun gear |
| 5 | Differential assembly |
| 6 | Final drive planetary ring gear |
| 7 | Torque converter housing |
Final Drive Component Cutaway View
Final Drive Chain, Sprockets and Planetary Gearset
The final drive consists of a drive chain and sprockets and a planetary gearset and differential assembly. The drive chain and sprockets transfer torque from the front planetary carrier hub to the differential assembly that has a planetary gearset integrated into it for final drive torque multiplication.
The final drive consists of the following components:
- Drive sprocket
- Drive chain
- Driven sprocket
- Final drive sun gear
- Final drive ring gear
- Final drive planetary carrier and differential assembly
Description and Operation - Differential
Differential Exploded View
Item
Description
1
Differential housing
2
Pinion shaft
3
Pinion gears
4
Side gears
Differential Cutaway View and External Sealing
Item
Descr..
Other information:
Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Body Control Module (BCM)
Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the diagnostic scan tool prior to removing the module. This information must be downloaded into the new module after installation. Carry out the PMI procedure for the BCM . Refer to..
Ford Ecosport 2014-2026 Service and Repair Manual: Removal and Installation - Crankshaft Position (CKP) Sensor
Special Tool(s) / General Equipment 303-1521Alignment Tool, Crankshaft Position SensorTKIT-2010C-FLM 303-507Timing Peg, Crankshaft TDCTKIT-2001N-FLMTKIT-2001N-ROW Ford Diagnostic Equipment Removal NOTE: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools as instructed in this procedure. The crankshaft pu..
Categories
- Manuals Home
- 2nd Gen Ford Ecosport Service Manual (2014 - 2026)
- Removal and Installation - Fuel Pump and Sender Unit
- Removal and Installation - Rear Bumper
- Description and Operation - Jacking and Lifting - Overview
- Removal and Installation - Catalytic Converter
- Removal and Installation - Starter Motor
Removal and Installation - Rear Halfshaft Seal
Special Tool(s) / General Equipment
205-153
(T80T-4000-W)
Handle
205-990Installer, Axle Seal
TKIT-2012A-FL
TKIT-2012A-ROW
Copyright © 2026 www.foecosport2.com