Ford Ecosport: Accessory Drive - 2.0L Duratec-HE (129kW/175PS) / Description and Operation - Accessory Drive - Component Location
Overview
| Item |
Description |
| 1 |
Accessory drive belt tensioner |
| 2 |
Coolant pump pulley |
| 3 |
Generator pulley |
| 4 |
Pulley - A/C compressor |
| 5 |
Belt - A/C compressor |
| 6 |
Crankshaft pulley |
| 7 |
Accessory drive belt |
Inspection and Verification
Verify the customer concern.
Visually inspect for obvious signs of mechanical damage.
Visual Inspection Chart
Mechanical
Damaged or contaminated accessory drive belt
Damaged or contaminated pulley(s)
Incorrect accessory drive belt
Incorrect fitment of t..
Other information:
Special Tool(s) /
General Equipment
204-169Clamping Tool, Boot Retaining Clamp
205-310Remover, Bearing/Gear
308-110Remover/Installer, Front Housing
Vise
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the inner CV joint boot.
Refer to: Inner Constant Velocity (CV) Joint Boot (205-0..
Removal
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems. Failure of these fasteners
may result in major service expense. Use the same or equivalent parts if
replacement is necessary. Do not use a replacement part of lesser
quality or substitute design. Tighten fasteners as specified.
NOTE:
Removal steps in this proc..