Ford Ecosport: Electronic Engine Controls - 2.0L Duratec-HE (129kW/175PS) / Removal and Installation - Cylinder Head Temperature (CHT) Sensor

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. NOTICE: Do not pull the engine appearance cover forward or sideways to remove. Failure to press straight upward on the underside of the cover at the attachment points may result in damage to the cover or engine components.

   1. Place your hand under the engine appearance cover at each grommet location and push straight up to release each grommet from the studs.
      
   2. After all of the grommets have been released from the studs, remove the appearance cover from the engine.
      

1. Position aside the grommet and disconnect the electrical connector.
   

1. Remove the CHT sensor.
   Torque: 89 lb.in (10 Nm)

Installation

1. NOTE: Install a new CHT sensor.

   To install, reverse the removal procedure.